PLYWOOD, FLOORBOARDS & TILE SYSTEM
Installation and downtime should be as short as possible when renovating floors. UZIN‘s time-saving and reliable system consists of UZIN PE 630 filler and primer combined with UZIN NC 196 fibre-reinforced smoothing compound. The system allows flat surfaces to be created over subfloors which contain joints such as wooden floorboards, tiles and flooring grade plywood. It also provides a great base for the luxury vinyl tiles.
UZIN KE 2000 S Universal wet and pressure sensitive adhesive
Dispersion adhesive for all common resilient coverings, textile coverings, wall coverings and UZIN insulation/installation underlays
- Odourless during and after application
- Excellent working properties
- Good tack with stringing
- Solvent-free
UZIN KE 66 Fibre-Reinforced Adhesive
High temperature adhesive for luxury vinyl tiles, vinyl and rubber
- Excellent working properties
- Very low consumption
- Short open time
- Solvent-free
UZIN NC 196 Fibre-Reinforced Smoothing Compound
Fibre-Reinforced Smoothing Compound for thicknesses from 3 to 40mm
- Fibre reinforced
- Thickness range from 3 to 40 mm
- Excellent flow properties and pumpable
- Low stress
- Excellent absorbency
UZIN NC 888 S Feather Coat
Rapid drying feather coat
- now with better adhesion and smoother finish
- from a ”feather-edge” up to 4 mm thickness
- no primer required
- extremely rapid drying
- excellent surface finish
- fine aggregate
UZIN PE 630 2-Component Trowel-Applied Primer
Dispersion cement based primer and filler
- Fills, seals and smoothes in one application
- Sets hydraulically
- For application thickness up to 1 mm
- Flexible and ductile when set
- Low chromate content according to EU-VO 1907/2006 (REACH) (powder component)