Flooring installation training
Our dedicated UZIN UTZ Campus was founded by a profound commitment to training and nurturing excellence. This purpose-built space is more than just a training centre. It is a dynamic hub for knowledge exchange, hands-on training, and collaborative growth. The UZIN UTZ Campus reflects our unwavering commitment to excellence, creating an engaging atmosphere that encourages effective training and skills development.
Combining our brands with the ‘Art of Floor Systems’, UZIN UTZ introduces an immersive experience at our Technical Training days. These sessions are a testament to our longstanding reputation for on-site technical prowess, supporting the industry in various job sites over the years. The training allows contractors to gain new skills and serves as a gateway to a deeper understanding of our brands and innovative systems. Join us on this journey to elevate your skills and expertise across various flooring solutions.
Courses
UZIN MASTERCLASS SUB-FLOOR PREPARATION TECHNIQUES 2 day course
Level up your flooring installation skills with this intensive two-day course focused on advanced sub-floor preparation, moisture control, smoothing & levelling systems and adhesive selection. Gain hands-on experience using market-leading tools and systems from UZIN and WOLFF.
WHAT WILL I LEARN?
Day 1:
Master the foundation of every great flooring installation.
- Efficient Floor covering removal:
Learn how to safely and effectively remove existing floor coverings using WOLFF uplifting equipment for maximum efficiency. - Subfloor Identification:
Distinguish between various subfloor types and understand how to assess their suitability for new installations. - Contamination Removal:
Practical techniques for eliminating contaminants using grinders and sanding equipment – ensuring a clean, bond-ready surface. - Strengthening Weak Screeds:
Techniques for case hardening and stabilising fragile screeds to avoid costly failures. - Moisture Testing & Logging:
Understand how to carry out accurate moisture testing, interpret results, and document findings for compliance and system warranties. - Moisture Control Solutions:
Selecting and applying the correct moisture barrier based on site conditions and test results.
Day 2:
Focus on surface perfection and choosing the right adhesive system for lasting success.
- Priming Techniques:
Explore different priming systems for a variety of sub-floor types, and understand when & why to use each one. - Mixing & Application Systems:
Set up efficient mixing stations and use pin rakes and smoothing trowels for even compound distribution. - Smoothing & Levelling Compound Application:
Hands-on training applying smoothing & levelling compounds over various substrates – from concrete to timber and calcium sulphate screeds. - Adhesive Selection & Installation:
Learn how to choose the correct adhesive for different floor coverings and site conditions. Includes full installation demonstrations using a variety of floor covering types. - Dry Adhesive Systems Overview:
Introduction to modern dry adhesives – where, why, and how to use them effectively. - WOLFF Hand Tools Showcase:
Get hands-on with a selection of WOLFF precision hand tools for cutting, prep, and installation – boosting speed and accuracy on-site.
2026 Dates:
- Tuesday 10th & Wednesday 11th February
- Tuesday 28th & Wednesday 29th April
- Thursday 06th & Friday 07th August
- Tuesday 27th & Wednesday 28th October
The cost for this course is £150 + VAT per person. Please note your booking is not confirmed until you have paid the invoice and received confirmation.
wHERE?
Uzin Utz Campus, Stafford Technology Park, Staffordshire, ST18 0GE
MASTERING MODERN SCREED SOLUTIONS 1 day course
Elevate your expertise with an immersive, hands-on workshop designed for flooring professionals, installers, and construction specialists. Learn the latest best practices, technologies, and systems in liquid screed applications.
what will i learn?
Understanding liquid screeds:
- What exactly is a liquid screed?
- Key differences between liquid calcium sulphate, cement-based screeds, and traditional sand/cement screeds.
- Performance, drying times, sustainability & project suitability Myth-Busting Session:
- Common misconceptions vs. real-world facts.
- Setting the record straight on calcium sulphate and liquid cement screeds.
Moisture matters:
- Why moisture testing is critical for flooring success.
- Demonstration: How to perform accurate moisture tests using industry tools and techniques.
Surface preparation essentials:
- What is laitance and how does it form?
- Identifying contamination risks & remediation methods.
- Sanding vs. grinding – which method suits your project?
Repairs & remediation:
- How to identify and effectively repair cracks in liquid screeds.
- Selecting the right repair products for each type of screed.
Installation best practices:
- Step-by-step guide to installing flooring systems over:
- Dry screeds
- Damp screeds (using appropriate moisture control systems)
- Overview of compatible adhesives, primers, and levelling compounds.
Live demonstrations & hands-on practice:
- Real-world application techniques with UZIN systems.
- Tips for achieving optimal adhesion and long-lasting results.
Expert Q&A panel:
- Bring your toughest site questions.
- Gain direct insight from UZIN technical specialists and industry pros.
2026 Dates:
- Thursday 22nd January
- Tuesday 07th April
- Thursday 23rd July
- Tuesday 15th September
The cost of this course is £100 + VAT per person. Please note your booking is not confirmed until you have paid the invoice and received confirmation.
Where?
UZIN UTZ Campus, Stafford Technology Park, Staffordshire, ST18 0GE
Advanced Sub-floor preparation & LVT technique (intensive workshop) 3 day course
Take your flooring expertise to the highest level with this intensive, hands-on training course designed for experienced installers and site professionals. Over three focused days, you’ll master complex subfloor scenarios, advanced LVT techniques, and real-world problem solving — all backed by British Standards and cutting-edge tools and systems.
Course Breakdown:
Day 1 – Advanced Sub-floor preparation & site evaluation
Get it right from the ground up – every time.
- Subfloor eecognition & risk assessment:
In-depth evaluation of complex subfloor conditions including mixed substrates, historic buildings, and site anomalies. - Advanced moisture testing & documentation:
Comparative testing using hygrometers, carbide bomb, RH probes, and thermal imaging. Learn to log results for compliance, traceability, and warranty validation. - Contamination removal techniques:
Effective use of grinders, sanding systems, and HEPA extraction for safe, clean prep in sensitive or occupied environments. - Dealing with challenging screeds:
Best practices for working with calcium sulphate, anhydrite, case-hardened, and liquid cement screeds – including grinding, laitance removal, and priming. - Crack diagnosis & repair:
Structural vs. shrinkage cracks – choosing the right epoxy resins, repair mortars, and reinforcement methods. - DPM selection for complex conditions:
Multi-layer moisture control for damp or mixed substrates – when to use surface DPMs, sheet membranes, or hybrid systems.
Day 2 – Advanced Smoothing, Priming & Adhesive Systems
Perfect the prep – precision levels that prevent failure.
- Priming over difficult substrates:
Tiling, steel, asphalt, and over old adhesives – choosing the right primer for optimal bond and performance. - Multi-layer levelling systems:
Learn to apply self-levelling and fibre-reinforced compounds in multi-layer builds. Includes ramping, patching, and high-tolerance finishes. - Adhesive science – beyond the basics:
Deep dive into adhesive technology – wet-lay, pressure sensitive, reactive resins, and dry adhesives. Includes suitability testing and installation timing. - Using mixing stations & pin rakes for efficiency:
Set up your site for large-scale installation success with tips on flow control, batch mixing, and application tools. - WOLFF equipment masterclass:
Full walkthrough of professional WOLFF hand and power tools for prep and install – including safe use, maintenance, and time-saving hacks.
Day 3 – LVT Installation Mastery: Design, Detail & Delivery
Achieve flawless installations in the most demanding layouts.
- Advanced setting out & planning:
LVT installation planning for large, open spaces and intricate layouts – includes herringbone with border, diagonal with inlay, and feature areas. - Precision cutting & pattern matching:
Learn how to achieve perfect mitres, insets, and complex transitions using WOLFF hand tools and templates. - Dealing with tricky obstacles:
Real-world scenarios: fitting LVT around curves, pillars, awkward doorways, and under fixtures. - Dry adhesive installation:
Complete install of LVT using dry adhesive systems – when to use them and how to avoid failure. - Stair nosing & vertical surfaces:
Techniques for installing LVT on stairs and risers – includes nosing prep, adhesive choice, and mitring tips. - Defect prevention & troubleshooting:
Spot issues before they happen – from bubbling and gapping to bond failure and telegraphing. - Final Q&A and competency check:
Ask the experts, share site issues, and receive personalised advice from UZIN and WOLFF trainers.
2026 Dates :
- Monday 02nd - Wednesday 04th March
- Tuesday 26th - Thursday 28th May
- Tuesday 22nd - Thursday 24th September
- Tuesday 08th - Thursday 10th December
The cost of this course is £200 + VAT per person. Please note your booking is not confirmed until you have paid the invoice and received confirmation.
WHERE?
Uzin Utz Campus, Stafford Technology Park, Staffordshire, ST18 0GE
Intermediate to Sub-floor preparation & LVT skills workshop 2 day course
Step up your skills with this hands-on course tailored for flooring professionals ready to bridge the gap between basic knowledge and advanced practice. Learn how to prepare sub-floors to industry standards and install LVT (Luxury Vinyl Tile) with precision and confidence.
WHAT WILL I LEARN?
Day 1 – Sub-Floor Preparation & Moisture Management
Lay the groundwork for successful, long-lasting installations.
- Subfloor identification:
Learn to recognise and assess different sub-floor types and understand how each impacts the installation process. - British standards overview:
A practical introduction to relevant British Standards in the flooring industry – what you need to know and how to stay compliant on-site. - Moisture testing techniques:
Perform moisture testing using a range of equipment and interpret the results to determine next steps. - Damp proof membrane (DPM) solutions:
Explore moisture mitigation methods, including when and how to apply DPM systems based on test outcomes. - Working with liquid screeds:
Understand the key differences between traditional and calcium sulphate liquid screeds, and how to correctly prepare them for LVT installation. - Crack repairs:
Learn how to identify and repair cracks effectively to ensure sub-floor stability and longevity. - Priming methods:
Get hands-on with different priming techniques and understand the importance of substrate compatibility. - Smoothing & levelling compounds:
Practical application of levelling compounds across various sub-floor conditions for a flawless finish.
Day 2 – LVT installation techniques
Perfect your skills in working with Luxury Vinyl Tile, from layout to finishing.
- What is LVT?
A technical and visual overview of Luxury Vinyl Tile, including construction types, wear layers, and design formats. - LVT layout & setting out:
Step-by-step guide to setting out for Straight Lay, Diagonal, and Herringbone installations – ensuring symmetry and flow. - Cutting methods:
Learn accurate and efficient cutting techniques for detailed LVT installation using industry-standard tools. - Adhesive selection & application:
Match the right adhesive system to the sub-floor and LVT type – includes wet and pressure-sensitive adhesives. - Dry adhesive systems:
Introduction to dry adhesives – when to use them and tips for effective application. - Using WOLFF tools for LVT installations:
Hands-on with WOLFF hand tools designed for LVT cutting, fitting, and detailing – improve speed and finish quality.
2026 Dates :
- Tuesday 06th & Wednesday 07th January
- Thursday 09th & Friday 10th April
- Wednesday 01st & Thursday 02nd July
- Tuesday 20th & Wednesday 21st October
The cost of this course is £150 + VAT per person. Please note your booking is not confirmed until you have paid the invoice and received confirmation.
WHERE?
Uzin Utz Campus, Stafford Technology Park, Staffordshire, ST18 0GE
Mastering sub-floor preparation & wet room installation (Advanced) 3 day course
WHAT WILL I LEARN?
This practical and knowledge-rich 3-day course is designed for flooring installers looking to develop their skills and confidence in sub-floor preparation and wetroom vinyl installation. With a mix of hands-on training and guided theory, this course deep-dives into industry best practices, British Standards, and real-world room installation scenarios.
Day 1: Sub-Floor Assessment & Preparation Techniques
- Identification of common sub-floor types (timber, concrete, asphalt, etc.)
- Understanding the impact of sub-floor condition on final finishes
- Overview of relevant British Standards for sub-floor prep and wet room installation
- Moisture testing: demonstration and hands-on use of:
- Hygrometers
- Tramex meters
- Hood test systems
- Application of Damp Proof Membranes (DPM's) — sheet and liquid systems
- Working with Liquid Screeds – preparation and key considerations
- Repairing cracks and surface defects
- Priming methods for various substrates
- Mixing and applying smoothing & levelling compounds
Day 2: Vinyl Installation Techniques & Cap and Cove Systems
- Overview of adhesive types: selection based on environment & vinyl type
- Application techniques: trowel sizes, open times, and common errors
- Tools of the trade: from weld trimmers to groovers
- Safety and PPE considerations for installers
- Setting out a room for vinyl installation
- Installation of cove former & capping strips in corners and transitions
- Substrate prep for secure bonding of profiles
- Tools and adhesives for cap and cove applications
- Templating vinyl for complex areas (alcoves, pillars, and small enclosures)
- Sheet vinyl coving: correct methods for internal & external mitres
- Welding vinyl seams: hot air welding techniques and tips
Day 3: Full Wet room Installation & Advanced Scenario
- Step-by-step wet room installation in mock room setup:
- Cap & cove install
- Vinyl sheet lay and trimming
- Seam welding and finishing
- Troubleshooting real-life installation challenges
2026 Dates:
- Tuesday 03rd - Thursday 05th February
- Tuesday 05th - Thursday 07th May
- Tuesday 08th - Thursday 10th September
- Tuesday 24th - Thursday 26th November
The cost of this course is £200 + VAT per person. Please note your booking is not confirmed until you have paid the invoice and received confirmation.
Where?
Uzin Utz Campus, Stafford Technology Park, Staffordshire, ST18 0GE
Mastering sub-floor preparation & wet room installation 2 day course
This hands-on, two-day course is designed for flooring professionals looking to expand their skills in sub-floor preparation and vinyl wet room installation. Learn to identify, prepare, and install over a range of substrates, with a strong focus on British Standards, moisture management, and best practices for cap and cove systems.
Course Breakdown:
Day 1 - Sub-Floor Preparation & Moisture Management
Master the essentials of prepping a sub-floor for a compliant, watertight installation.
- Sub-floor type identification:
Learn to identify various substrates and assess their readiness for installation – including concrete, timber, screed, and refurbishment surfaces. - British standards overview:
Understand the key British Standards that govern sub-floor prep, moisture testing, and resilient floor installation in wet areas. - Moisture testing (Hands on)
Carry out moisture testing using different tools and techniques, including hygrometers, RH probes, and surface tests. Learn how to interpret and document results. - Damp proof membrane (DPM) solutions:
Choose and apply the right DPM system for your conditions – from moisture suppression layers to full-surface barriers. - Working with liquid screeds:
Learn how to correctly prepare calcium sulphate and liquid cement screeds, including laitance removal, sanding, priming, and drying requirements. - Crack repair techniques:
Identify the cause of cracking and apply appropriate repair compounds or epoxy injection systems. - Priming methods:
Understand the importance of primer compatibility with both sub-floor and smoothing compound, and how to apply them correctly. - Smoothing & levelling compounds:
Practical application of levelling compounds over a range of substrates, with focus on wet room performance requirements.
Day 2 – Cap & cove vinyl wet room installation
Take your LVT and vinyl skills further with this deep dive into wet room-specific installation.
- Setting out for wet room installations:
Learn how to accurately plan layouts for efficient fitting, minimising waste and achieving clean transitions around drains, doorways, and corners. - Installing cove formers & capping strips:
Step-by-step guidance on installing cap and cove systems – essential for hygienic and compliant wet rooms. - Vinyl templating for tight spaces:
Practice templating methods for small, awkward areas such as behind toilets, pipe boxes, and alcoves. - Coving sheet vinyl & cutting mitres:
Heat forming and cutting techniques to create seamless internal and external corners. - Vinyl welding techniques:
Learn to weld seams using hot air welding equipment for a watertight and professional finish. - Using tape systems in cap & cove installations:
Introduction to tape adhesives for vertical installations – when and how to use them effectively. - Adhesive selection & application:
Choose the correct adhesive for every surface – including wall-to-floor transitions, vertical bonding, and specialist wet areas. - Tool overview & usage:
Hands-on with WOLFF tools specifically designed for cutting, welding, coving, and installing wet room flooring systems.
2026 Dates:
- Wednesday 25th - 26th March
- Wednesday 24th - 25th June
- Tuesday 25th - 26th August
- Tuesday 10th - 11th November
The cost of this course is £150 + VAT per person. Please note your booking is not confirmed until you have paid the invoice and received confirmation.
Where?
Uzin Utz Campus, Stafford Technology Park, Staffordshire, ST18 0GE
Art of vinyl floor installation 2 day course
Unlock the full potential of your flooring skills with our comprehensive 2-day course, meticulously designed for you to excel in sub-floor preparation and vinyl installation. This course is your gateway to mastering advanced techniques, ensuring unparalleled expertise in the realm of sub-floor craftsmanship and the delicate art of vinyl fitting.
WHAT WILL I LEARN?
Day 1:
Foundations of Vinyl Flooring Installation
- Introduction to vinyl flooring types and systems
Overview of different vinyl floor types (sheet, tile, plank) and their applications. - Sub-floor assessment and preparation
Identifying suitable sub-floors, repairing imperfections, and ensuring a smooth base. - Moisture testing & managing dampness
Techniques for moisture assessment and solutions to prevent moisture-related problems. - Adhesive selection and application methods
Choosing the right adhesives and mastering application techniques for strong, lasting bonds. - Layout planning and setting out vinyl floors
Techniques for accurate measurements, pattern alignment, and minimising waste.
Day 2:
Installation techniques & finishing touches
- Cutting, fitting, and seaming vinyl flooring
Best practices for precise cutting, tight fitting, and flawless seams. - Rolling and securing vinyl flooring
Techniques for ensuring proper adhesion and eliminating air pockets. - Trimming and finishing edges
Creating clean edges and transitions for professional results. - Troubleshooting common installation issues
Identifying and resolving problems during and after installation. - Maintenance and aftercare of vinyl floors
Best practices for cleaning, protecting, and prolonging the life of vinyl flooring.
2026 Dates:
- Monday 12th & Tuesday 13th January
- Tuesday 12th & Wednesday 13th May
- Monday 06th & Tuesday 07th July
- Tuesday 01st & Wednesday 02nd September
The cost of this course is £150 + VAT per person. Please note your booking is not confirmed until you have paid the invoice and received confirmation.
wHERE?
Uzin Utz Campus, Stafford Technology Park, Staffordshire, ST18 0GE
ESTIMATOR SUB-FLOOR PREPARATION ESSENTIALS 1 DAY COURSE
Gain the crucial knowledge you need to confidently assess and estimate subfloor systems in any flooring project. This focused one-day course is designed to equip estimators with a clear understanding of subfloor types, preparation requirements, and common challenges that affect project scope and costs.
What will i learn?
- Introduction to Subfloor Systems
Overview of common subfloor types: concrete, timber, screeds, and modern composite systems. - Key Factors Affecting Subfloor Performance
Moisture levels, flatness, strength, and contamination—what to look for and why it matters. - Moisture Testing Methods
How to interpret moisture test results and their impact on flooring selection and installation. - Subfloor Preparation Techniques
Identifying necessary repairs, smoothing, levelling, and priming requirements. - Damp Proof Membranes and Moisture Barriers
When and where they are needed, and how they affect project planning and budgeting. - Common Subfloor Issues and How They Influence Estimates
Cracks, unevenness, contamination, and their cost implications. - Effective Communication with Clients and Contractors
How to accurately report findings and justify costs in your estimates.
2026 Dates:
- Tuesday 20th January
- Wednesday 01st April
- Wednesday 15th July
- Tuesday 13th October
The cost of this course is £100 + VAT per person. Please note your booking is not confirmed until you have paid the invoice and received confirmation.
Where?
UZIN UTZ Campus, Stafford Technology Park, Staffordshire, ST18 0GE
The cost of this course is £100 per person. To book your place please email training.uk@uzin-utz.com. Please note your booking is not confirmed until you have paid the invoice and received confirmation.
UNDERFLOOR HEATING SYSTEM SOLUTIONS (THE UZIN WAY) 1 day course
Discover the essential skills and knowledge required to expertly install floorcoverings over underfloor heating systems—whether traditional wet systems or the latest modern board technologies.
This course combines theory with hands-on practice, equipping you to deliver flawless, durable, and energy-efficient floor installations every time.
Course breakdown:
- Understanding Underfloor Heating Systems
Explore the different types of underfloor heating: traditional wet screed systems and modern dry board solutions. - Subfloor Preparation & Compatibility
Learn how to prepare various subfloors to ensure optimal performance and longevity of both the heating system and floorcovering. - Thermal Considerations in Floorcovering Installation
Key principles of heat transfer and how to select floorcoverings that complement underfloor heating. - Installation Techniques for Traditional Systems
Best practices for laying floorcoverings over wet screed underfloor heating, including moisture management and curing times. - Working with Modern Board Systems
Step-by-step guidance on installing floorcoverings over dry board systems, with focus on precision, stability, and insulation. - Adhesive & Fixing Methods
Selecting adhesives and fixings that work effectively with heated floors without compromising performance. - Troubleshooting Common Challenges
Identifying and resolving issues unique to underfloor heated installations. - Aftercare & Maintenance
Ensuring long-lasting results with proper post-installation care tailored to underfloor heating environments.
2026 Dates:
- Wednesday 25th February
- Wednesday 20th May
- Tuesday 28th July
- Thursday 15th October
The cost of this course is £100 + VAT per person. Please note your booking is not confirmed until you have paid the invoice and received confirmation.
Where?
UZIN UTZ Campus, Stafford Technology Park, Staffordshire, ST18 0GE
UZIN SUMMER CAMP
Set up camp & get ready for adventure!
Pitch your tents at the beautiful Buckley Farm and prepare for an unforgettable journey along one of Shropshire’s most scenic waterways.
Explore the river Severn by canoe
Embark on an exciting paddle down the iconic River Severn Canoe Trail! Starting right from Buckley Farm, glide through stunning landscapes as the river meanders its way toward historic Shrewsbury.
Enjoy the fresh air, the peaceful sounds of nature, and the thrill of the open water—all while connecting with fellow outdoor enthusiasts.
Whether you’re a seasoned paddler or a first-timer, this summer camp promises adventure, fun, and memories that will last a lifetime.
Pack your gear, bring your spirit of adventure, and join us for the ultimate summer camp experience!
Please Note: You will be taking part at your own risk, prior canoeing experience is recommended but not required. You will be given a safety brief and will be made aware of the features to look out for along the way.
2026 Dates:
- Friday 24th & Saturday 25th July
The cost of this course is £150 + VAT per person. Please note your booking is not confirmed until you have paid the invoice and received confirmation.
Where?
Buckley Farm to Shrewsbury, Shropshire
What to Bring:
Your own tent and camping gear
Essential Information
How much does it cost?
Our training costs:
- 1 day course - £100 + VAT per person
- 2 day course - £150 + VAT per person
- 3 day course - £200 + VAT per person
What's included?
- Full and comprehensive training from an expert
- Lunch and refreshments throughout the day
- Certificate upon completion
To book your place you must make a training enquiry. Once we have checked availability, we will confirm and send over your training invoice. Your place on our training courses are not fully confirmed until you have paid the training invoice and received a confirmation email.
Cancellation less than a week prior to the course will result in a full charge. Cancellation over a week before the course will result in a refund being provided.
Where is the training?
UZIN:
Uzin Utz Campus, Stafford Technology Park, Staffordshire, ST18 0GE.
For the exact location, please use what3words: ///popped.joke.socket.
What time?
The courses run from 9:00 am to 17:00 pm
How do I book a place?
For more information or to book a place E-mail: training.uk@uzin-utz.com
Location
